Steering Stopper
BPSY-0159
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from 'tank slappers'. Installs in minutes. No special tools or dismantling of the bike required. Fitting Instructions: | $15.98 |
|
KTM Keyless Tank Cap (14-21)
TYLY-0223
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390) Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap. If your tank cap is centered it will not fit. If your tank cap is offset from center and moved up, then it should. Unfortunatly KTM isn't clear which model years have which caps. | $54.42 |
|
KTM Keyless Tank Cap (22+)
TYLY-1223
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves. Supplied complete with seals, it can be installed in minutes and you can re-use the original screws. Fits all KTM RC models which are using the OEM filler cap with the hole offset towards the back (towards the rider) of the tank hole. If your tank cap is centered it will not fit. If your tank cap is offset from center and moved down, then it should fit. To our knowlege, this change was only made to the 2022 RC390 and up. | $63.57 |
|
Seat Pad
BPSP-0007
EVA foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort! Underside of seat has 3M double sided tape for easy application. | $14.64 |
|
Seat Bum Stop
BPSP-0003
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike. This size is the smaller of the two versions we supply. See BPSP-0007 for larger version. Estimated Product Weight: 0.11lbs / 0.050kg Estimated Product Box Weight: 0.11lbs / 0.050kg | $11.51 |
|
Axle Slider Kit
TPER-2004
This kit is specifically designed for the KTM racer in mind. The axle sliders have been designed to help protect your bike in the event of a crash. Easy to install and look cool too in KTM orange and black. Now you really are ready to race!
Estimated Product Weight: 0.86lbs / 0.391kg Estimated Product Box Weight: 0.22lbs / 0.100kg | $42.56 |
|
Rear Stand Spools - Black
TYLY-1209
This item is suitable for any motorcycle with M10 bolt holes for rear stand spools. NOTE: The Bajaj factory that produces the KTM RC390 and Duke 390 does not have the best QC standards where it comes to the thread pitch for the rear spools mount location locations on the swingarm. I have found that MOST are threaded and tapped correctly with Fine M10x1.25 pitch threads, but occasionally some swingarms have been tapped with Course M10x1.5 pitch threads. I have also found instances where the holes are not threaded at all, and even on one occasion where a broken tap was discovered stuck in a brand new bike and it came that way from the factory! Officially, the threads are supposed to be M10x1.25 pitch. Most likely, your swingarm will be threaded as such, but if the threads do NOT fit, then you (unfortunately) have one of the swingarms where the factory worker grabbed the wrong thread pitch tap when they hand tapped your swingarm. This is covered extensively in the online forums, so just be aware that the bolts may not fit. It's unlikely, but it is possible. If you start to thread in your spools, and the bolt doesn't thread in easily, STOP!!! Don't force it. Check your threads in the swingarm against the threads on the bolt, and ensure that they are the same. Sometimes, the threads just need to be cleaned. Sometimes, the swingarm has the correct size but wrong thread pitch. | $19.11 |
|
Rear Stand Spools - Silver
TYLY-0209
This item is suitable for any motorcycle with M10 bolt holes for rear stand spools. Estimated Product Weight: 0.18lbs / 0.082kg Estimated Product Box Weight: 0.22lbs / 0.100kg | $19.11 |
|
Carbon Workshop Tray 300x200
TYTO-0004A
Using high end automotive and aerospace technology, this useful and beautiful tray will be the envy of all your friends and racing competitors and we promise that it will become an essential and indispensable part of your tool kit, as it has ours! The tray is both lightweight and extremely strong due to the method of construction and the materials used. Using a balance of craftsmanship and technology, each tray is individually laminated by skilled workers in a precision aluminium mold where it is subjected to high pressure to give unrivalled crisp and sharp finish which is both chemical and abrasion resistant. We have been testing these trays for several months now and given them no mercy. We have put brake fluid, carburetor cleaner, engine oil, gasoline and other nasty fluids in them and they have retained both their strength and beautiful sheen. We have used them to hold various motorcycle parts and tools and apart from minor surface scratching which is to be expected, the hard epoxy finish has proven to be extremely tough and durable, but forgiving enough not to damage any delicate parts. Of course, like all trays, these can be used around the home for drinks, fruit bowl and other decorations. If you have an application or require a similar product in large quantities, please contact us and we will be happy to discuss all details including design through to manufacturing and delivery. These trays are easily stackable and weigh only 240 grams
| $63.97 |
|
Carbon Parking Brake
TYTO-0030
The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations: -When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand -Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle -Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc. Don't worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature. It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you'll be surpised how handy it is! | $34.90 |
|
RC390 Toy with Stand - 1:18 Scale
RCMODEL
1:18 Maisto KTM RC 390 Racing Motorcycle Bike Model Toy White Size: 11*3*6CM
| $24.99 |
|
Orange Duck Tape
DUCK-TAPE-ORANGE
Orange Duck Tape - Perfect for covering ugly wheel weights obstructing the Orange color of your orange wheels! 1.88 inch wide x 15 yards Estimated Product Weight: 0.35lbs / 0.159kg Estimated Product Box Weight: 0.10lbs / 0.045kg | $8.99 |
|
Bike Cover - Two Tone Orange/Black
TMER-0049
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable. Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700. | $53.27 |
|
Bike Cover - Two Tone Blue/Black
TMER-0048
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable. Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700. | $53.27 |
|
Bike Cover - Two Tone Red/Black
TMER-0051
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable. Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700. | $53.27 |
|
Bike Cover - Two Tone Green/Black
TMER-0050
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable. Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700. | $53.27 |
|
Bike Cover - Black
TMER-0053
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable. Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700. | $53.27 |
|
RAM Mount Kit - 1 Inch
RAM-10
The Formula390 RAM Mount Kit puts a RAM Ball (kit comes with either a 1 inch ball or a 1.5 inch genuine RAM ball) right where you need it! The Formula390 RAM Mount Kit mounts firmly and securely to the frame between the battery box and the headstock. This then allows you to mount any device you want to it, such that it doesn't pivot with steering imputs unlike other RAM Mount setups. This can allow you to mount a GoPro, Phone, GPS, Lap Timer, or any of the other devices you might want. When using a GoPro, you can then position the camera such that you can see steering inputs, throttle, clutch, and brake control, the instrument panel, and the track or road... all without pivoting the "wrong way" duing counter steering inputs. This is an invaluable tool for those who wish to record the cockpit and view from their bike. Estimated Product Weight: 0.10lbs / 0.045kg Estimated Product Box Weight: 1.30lbs / 0.591kg | $225.00 |
|
RAM Mount Kit - 1.5 Inch
RAM-15
The Formula390 RAM Mount Kit puts a RAM Ball (kit comes with either a 1 inch ball or a 1.5 inch genuine RAM ball) right where you need it! The Formula390 RAM Mount Kit mounts firmly and securely to the frame between the battery box and the headstock. This then allows you to mount any device you want to it, such that it doesn't pivot with steering imputs unlike other RAM Mount setups. This can allow you to mount a GoPro, Phone, GPS, Lap Timer, or any of the other devices you might want. When using a GoPro, you can then position the camera such that you can see steering inputs, throttle, clutch, and brake control, the instrument panel, and the track or road... all without pivoting the "wrong way" duing counter steering inputs. This is an invaluable tool for those who wish to record the cockpit and view from their bike. Estimated Product Weight: 1.30lbs / 0.591kg Estimated Product Box Weight: 0.30lbs / 0.136kg | $230.00 |
|
TYGA Radiator Overflow Bottle Kit
BPAC-1002
Comprising clear pp plastic bottle, overflow tube and cable ties, this useful lightweight product is ideal for race bikes and for specials and repalces the cumbersome and ugly stock item. Estimated Product Weight: 0.11lbs / 0.050kg Estimated Product Box Weight: 0.11lbs / 0.050kg | $23.64 |
|
Fender Eliminator - Standard 14-21
TYLY-0148
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation. Estimated Product Weight: 0.44lbs / 0.200kg Estimated Product Box Weight: 0.44lbs / 0.200kg | $47.90 |
|
Fender Eliminator - Standard 22+
TYLY-0311
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation. Estimated Product Weight: 0.44lbs / 0.200kg Estimated Product Box Weight: 0.44lbs / 0.200kg | $47.90 |
To read all about our Packaging, Shipping, and returns policy click here