Exhaust - RC390 - WSS300 - STREET 2014-2021
EXPS-0111
2014-2021 - This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand-rolled and welded to give this system incredible looks as well as performance. And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment. By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability. The system features a primary silencer, which helps reduce the sound level without any loss of performance. The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date. Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe. As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust. Compatible TYGA-Performance Belly Pans are:
Note, this is what we describe as the ‘Street’ system. The only difference between the street and race systems are the silencer in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112 Estimated Product Weight: 9.30lbs / 4.227kg Estimated Product Box Weight: 2.42lbs / 1.100kg | $1104.76 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - WSS300 - RACE 2014-2021
EXPS-0112
2014-2021 - This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand-rolled and welded to give this system incredible looks as well as performance. And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment. By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability. The system features a primary silencer, which helps reduce the sound level without any loss of performance. The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date. Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe. As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust. Compatible TYGA-Performance Belly Pans are:
Note, this is what we describe as the ‘Race’ system. The only difference between the street and race systems are the silencer in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112 Estimated Product Weight: 9.30lbs / 4.227kg Estimated Product Box Weight: 2.42lbs / 1.100kg | $1104.76 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - WSS300 - RACE 2022+
EXPS-0160
2022+ - Fit's for both for street or race applications - This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance. Standard full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment. By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability. The system features a primary silencer, which helps reduce the sound level without any loss of performance. The system is also provided with a dB killer as well as a carbon heat shield WEIGHT Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Note: Does NOT fit with stock bellypan. Does not yet have an official bellypan, however, the BPCL-7431 or BPFL-7431 can be trimmed to fit. An official belly is being worked on, but for racers who need a belly, this is a workable solution in the interim. Does not fit with the Sebmoto bodywork. | $1089.87 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - Stainless Oval w/Carbon Endcap 2014-2021
EXPS-0091
2014-2021 - This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issue swith ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction. CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R. Please also see EXPS-0062 for similar system. CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your applicationNote: Orders without logo will take longer to fill as we don't stock exhast cans without the logo so will need to special order them. Performance and DynographPlease refer to dynographA) All Standard. B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map Very useful gains especially in the mid range for both B) and C), for much stronger acceleration. | $1078.83 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - Stainless Moto Maggot 2014-2021
EXPS-0092
2014-2021 This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issue swith ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction. CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R. Please also see EXPS-0062 for similar system. CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your applicationNote: Orders without logo will take longer to fill as we don't stock exhast cans without the logo so will need to special order them. Performance and DynographPlease refer to dynographA) All Standard. B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map Very useful gains especially in the mid range for both B) and C), for much stronger acceleration. | $936.77 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - Stainless Oval w/Carbon Endcap 2014-2016
EXPS-0061
2014-2016 This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issue swith ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction. CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R. Please also see EXPS-0062 for similar system. CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your applicationNote: Orders without logo will take longer to fill as we don't stock exhast cans without the logo so will need to special order them. Performance and DynographPlease refer to dynographA) All Standard. B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map Very useful gains especially in the mid range for both B) and C), for much stronger acceleration. | $913.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust - RC390 - Stainless Moto Maggot 2014-2016
EXPS-0062
2014-2016 This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issue swith ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction. CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R. Please also see EXPS-0062 for similar system. CustomizationFeel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphcs and won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your applicationNote: Orders without logo will take longer to fill as we don't stock exhast cans without the logo so will need to special order them. Performance and DynographPlease refer to dynographA) All Standard. B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map Very useful gains especially in the mid range for both B) and C), for much stronger acceleration. | $771.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust Section - Header 2014-2021
EXPT-0003
2014-2021 Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position. Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062
| $198.49 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Fender Eliminator - TYGA Undertail Exhaust
TYLY-0147
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation. Estimated Product Weight: 0.51lbs / 0.232kg Estimated Product Box Weight: 0.44lbs / 0.200kg | $59.75 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust Guard - Left
BPCC-0021L
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed. Compatible with the following TYGA RC390 exhaust systems: | $84.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust Guard - Right
BPCC-0021R
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed. Compatible with the following TYGA RC390 exhaust systems: | $84.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust Belly Pan Outlet Cover - Carbon
BPCC-7431
This cover fills the outlet hole left in the stock belly pan after installation of an under seat or similar exhaust. Easy to install, supplied with mounting hardware. Estimated Product Weight: 0.22lbs / 0.100kg Estimated Product Box Weight: 0.44lbs / 0.200kg | $91.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Exhaust Belly Pan Outlet Cover - White
BPFC-7431W
This cover fills the outlet hole left in the stock belly pan after installation of an under seat or similar exhaust. Easy to install, supplied with mounting hardware and painted white to blend in. Estimated Product Weight: 0.22lbs / 0.100kg Estimated Product Box Weight: 0.44lbs / 0.200kg | $54.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||
Carbon License Plate Frame
BPCC-6002
This is a real carbon fiber motorcycle license plate frame made by TYGA Performance and is made to fit the standard size US motorcycle license plates. It's perfect for those motorcycle enthusiasts with carbon fiber parts on their beloved bikes or just simply wants to add a performance touch. Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time. Package will include 1 real carbon fiber motorcycle license plate frame that fits onto standard size US motorcycle license plates; screws are not included for the installation. | $73.31 |
To read all about our Packaging, Shipping, and returns policy click here