Formula390

Carbon Kit, Upper Fairing - Street
BPFS-0170
This TYGA designed upper fairing kit replaces the ugly stock set up with attractive sleek styling.

As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.

In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.

The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.

Estimated Product Weight: 6.93lbs / 3.150kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

$948.40

Carbon Seat Cowling - Race - Cup Style
BPCT-7131
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points and this part is finished in high gloss UV resistant clearcoat so no need to paint.

This product is supplied with all mounting hardware.

We aim to have this product in stock at all times for immediate shipping. Now waiting or worrying about if the parts will arrive in time for your next race.
Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$312.58

Carbon Seat Cowling - Street - Cup Style
BPFS-0142
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but has been modified to take the stock KTM rear light cluster and registration/license plate holder. Being made from carbon it is lighter than stock and is supplied finished in high gloss UV resistant clearcoat so no need to paint.

This product is supplied with all mounting hardware and consists of the seperate components: Seat Pad, Seat Cowling Top, and the Seat Cowling Undertray, all which are also available seperately.



Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg
$442.59

Carbon Passenger Seat Replacement - Street
BPCT-7231
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of carbon is much lighter. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.

This product is supplied with all mounting hardware.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 2.80lbs / 1.273kg

$246.09

Carbon Set - Fender, Hugger, & Chain Guard
BPFS-1106
This set comprises the carbon products of the Fender, Rear Hugger, and the Chain Guard. Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
Estimated Product Weight: 1.61lbs / 0.732kg
Estimated Product Box Weight: 2.50lbs / 1.136kg
$405.23

Carbon Belly Pan - Race - Cup Style 2014-2015
BPCL-7231
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clearcoat so no additional painting is necessary.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

This product can be fitted to a street bike as well as cup racing bikes.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$262.44

Carbon Belly Pan - Race - Cup Style 2016+
BPCL-7331
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clearcoat so no additional painting is necessary.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

This product can be fitted to a street bike as well as cup racing bikes.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$262.44

Carbon Belly Pan - Race - WSS300
BPCL-7431
This belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.

All fitting hardware included.

See table below for compatibility between belly pans and exhaust systems:

Model Exhaust BPFL-7231 BPCL-7231 BPFL-7331 BPCL-7331 BPCL-7431 BPFL-7431
OEM KTM 2014-16 yes yes yes yes no no
OEM KTM 2017-2019+ yes yes yes yes no no
EXPS-0061 yes yes yes yes yes yes
EXPS-0062 yes yes yes yes yes yes
EXPS-0062 yes yes yes yes yes yes
EXPS-0091 yes yes yes yes yes yes
EXPS-0092 yes yes yes yes yes yes
EXPS-0111 no no no no yes yes
EXPS-0112 no no no no yes yes


Estimated Product Weight: 2.40lbs / 1.091kg
Estimated Product Box Weight: 7.71lbs / 3.505kg

$460.91

Carbon Front Fender
BPCF-7131
This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
Estimated Product Weight: 0.62lbs / 0.282kg
Estimated Product Box Weight: 1.60lbs / 0.727kg
$164.06

Carbon RC390R Rear Hugger
BPCH-7031
Item is for the RC390R but also fits all RC model years. This sleek hugger replaces the nasty plastic item, adds class to your ride and is an easy installation. Combine with the Carbon RC390R Chain Guard (BPCX-7131) for a super sleek and easy to access the rear shock or chain function and looks.
Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.66lbs / 0.300kg
$90.26

Carbon RC390R Chain Guard
BPCX-7131
Item is for the RC390R but also fits all RC model years. This sleek chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.35lbs / 0.159kg
Estimated Product Box Weight: 0.80lbs / 0.364kg
$94.34

Carbon Rear Hugger/Chain Guard Assembly
BPCH-7131
This rear hugger/chain guard assembly replaces the nasty plastic items, adds class to your ride and is an easy installation. Consists of the two products below.
Estimated Product Weight: 1.05lbs / 0.477kg
Estimated Product Box Weight: 2.50lbs / 1.136kg
$249.37

Carbon Rear Hugger Cover
BPCH-7131A
This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.28lbs / 0.127kg
Estimated Product Box Weight: 0.55lbs / 0.250kg
$82.03

Carbon Rear Chain Guard
BPCH-7131B
This rear hugger/chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.

This product is also part of the sets BPCH-7131 and BPFS-1106
Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 2.50lbs / 1.136kg

$180.45

Carbon Rear Hugger/Chain Guard/SwingArm Cover Assembly
BPCH-7231
This rear hugger/chain guard assembly also covers the swing arm to give it a smooth and race orientated appearance. Adds class to your ride and is an easy installation. Ideally, it can be installed with rear stand bobbins TYLY-1209 and TYLY-0209.


Estimated Product Weight: 2.20lbs / 1.000kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

$369.13

Carbon Sprocket Cover
BPCC-7131
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.

Please note, this product fits the 390 Duke and RC390.
Estimated Product Weight: 0.26lbs / 0.118kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

$90.26

Carbon Tank/Battery Cover Assembly
BPCX-7431
This component replaces the nasty plastic items, adds class to your ride and is an easy installation.

This product can also be ordered seperately as battery box cover BPCX-7431A and tank cover BPCX-7431B, however please note that BPCX-7431 cannot be used with the stock battery cover.
Estimated Product Weight: 2.29lbs / 1.041kg
Estimated Product Box Weight: 3.30lbs / 1.500kg

$429.85

Carbon Tank Cover
BPCX-7431A
This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover.

Note that BPCX-7431 cannot be used with the stock battery cover and must be used with BPCX-7431B.
Estimated Product Weight: 1.96lbs / 0.891kg
Estimated Product Box Weight: 2.20lbs / 1.000kg

$326.95

Carbon Battery Box Cover
BPCX-7431B
This component replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.77lbs / 0.350kg
$127.82

Carbon Upper Cowling - Race - Cup Style
BPCU-7131
Carbon Upper Cowling replaces the stock heavy and brittle stock unit with a carbon unit.
Estimated Product Weight: 1.15lbs / 0.523kg
Estimated Product Box Weight: 2.70lbs / 1.227kg
$246.09

Carbon Side Cowling - A - Left
BPCX-7231L
Side Cowling A, Left, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.

Must be used with:
BPFX-7331L TYGA Performance Side Cowling B, Left, Race (GRP)
or
BPCX-7331L TYGA Performance Side Cowling B, Left, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

$246.09

Carbon Side Cowling - A - Right
BPCX-7231R
Side Cowling A, Right, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.

Must be used with:
BPFX-7331R TYGA Performance Side Cowling B, Right, Race (GRP)
or
BPCX-7331R TYGA Performance Side Cowling B, Right, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

$246.09

Carbon Side Cowling - B - Left
BPCX-7331L
Side Cowling B, Left, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP)
or
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$246.09

Carbon Side Cowling - B - Right
BPCX-7331R
Side Cowling B, Right, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231R Performance Side Cowling A, Right, Race (GRP)
or
BPCX-7231R Performance Side Cowling A, Right, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$246.09

Carbon/Kevlar Case Guards - Set
BPCC-7331
2014-2015 Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 0.60lbs / 0.273kg
$196.84

Carbon/Kevlar Case Guards - Set
BPCC-7531
2016-2019+ model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 0.60lbs / 0.273kg
$196.84

Carbon/Kevlar Case Guard - Left
BPCC-7331L
2014-2015 Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.60lbs / 0.273kg
$98.42

Carbon/Kevlar Case Guard - Left
BPCC-7531L
2016-2019+ Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.60lbs / 0.273kg
$98.42

Carbon/Kevlar Case Guard - Right
BPCC-7331R
2014-2019+ - Fits ALL model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.60lbs / 0.273kg
$98.42

Carbon Shark Fin
BPCX-0005
Universal, Swing Arm, Carbon Shark Fin Guard This tough carbon shark fin is designed to fit on the bottom.

Estimated Product Weight: 0.19lbs / 0.086kg
Estimated Product Box Weight: 0.22lbs / 0.100kg
$44.80

Upper/Meter Stay - Race
TYLY-0158
This lightweight all aluminium upper cowling/meter stay replaces the heavy cast one supplied with the bike and weighs only a third of the original. It is designed to be strong but minimal and supports both the fairing and instrument securely while saving 1 kg/2.2 pounds in weight. In addition to the weight saving, it is very easy to install and in the event of an accident, easy to repair. It has rubber mountings to support the instrument cluster and can be installed in a matter of minutes. Please note this is for circuit use only and can be installed with either stock KTM bodywork or TYGA Performance race bodywork.
BEFORE @ 1.52kg: AFTER @ 0.52kg:

Stock headlights cannot be used with this race orientated product. RACE ONLY

Estimated Product Weight: 1.21lbs / 0.550kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

$192.96

Fiberglass Kit, Upper Fairing - Street
BPFS-0171
This TYGA designed upper fairing kit replaces the ugly stock set up with attractive sleek styling.

As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.

In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.

The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.


Estimated Product Weight: 7.15lbs / 3.250kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

$689.71

Fiberglass Seat Cowling - Race - Cup Style
BPFT-7131
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from high quality glass mat and the best epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware.

We aim to have this product in stock at all times for immediate shipping. Now waiting or worrying about if the parts will arrive in time for your next race.
Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$174.41

Fiberglass Seat Cowling - Street - Cup Style
BPFS-0141
This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but has been modified to take the stock KTM rear light cluster and registration/license plate holder. This product is made using the best epoxy resins and high quality glass mat. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware and consists of the seperate components: Seat Pad, Seat Cowling Top, and the Seat Cowling Undertray, all which are also available seperately.



Estimated Product Weight: 2.87lbs / 1.305kg
Estimated Product Box Weight: 2.90lbs / 1.318kg
$244.46

Fiberglass Passenger Seat Replacement - Street
BPFT-7231
This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of the best epoxy resin and high quality glass mat fiberglass is much lighter and can be painted to match your bike. This part is primed but may require some light sanding and/or fill primer prior to painting. This product is supplied with all mounting hardware. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.

This product is supplied with all mounting hardware.
Estimated Product Weight: 1.32lbs / 0.600kg
Estimated Product Box Weight: 2.80lbs / 1.273kg

$123.08

Fiberglass Belly Pan - Race - Cup Style 2014-2015
BPFL-7231
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive so as to satisify most race organizations requirements for a fluid catchment.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$131.24

Fiberglass Belly Pan - Race - Cup Style 2016+
BPFL-7331
This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive so as to satisify most race organizations requirements for a fluid catchment.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

$131.24

Fiberglass Belly Pan - Race - WSS300
BPFL-7431
This belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.

All fitting hardware included.

See table below for compatibility between belly pans and exhaust systems:

Model Exhaust BPFL-7231 BPFL-7231 BPFL-7331 BPFL-7331 BPFL-7431 BPFL-7431
OEM KTM 2014-16 yes yes yes yes no no
OEM KTM 2017-2019+ yes yes yes yes no no
EXPS-0061 yes yes yes yes yes yes
EXPS-0062 yes yes yes yes yes yes
EXPS-0062 yes yes yes yes yes yes
EXPS-0091 yes yes yes yes yes yes
EXPS-0092 yes yes yes yes yes yes
EXPS-0111 no no no no yes yes
EXPS-0112 no no no no yes yes


Estimated Product Weight: 2.40lbs / 1.091kg
Estimated Product Box Weight: 7.71lbs / 3.505kg

$207.83

Fiberglass Front Fender
BPFF-7131
This lightweight yet tough fiberglass front fender replaces the plastic item, and is ideal for racing whre crash resistance is important. This part is primed but may require some light sanding and/or fill primer prior to painting.
Estimated Product Weight: 0.84lbs / 0.382kg
Estimated Product Box Weight: 2.50lbs / 1.136kg
$98.42

Fiberglass Tank/Battery Cover Assembly
BPFX-7431
This component replaces the nasty plastic items, adds class to your ride and is an easy installation.

This product can also be ordered seperately as battery box cover BPFX-7431A and tank cover BPFX-7431B, however please note that BPFX-7431 cannot be used with the stock battery cover.
Estimated Product Weight: 1.76lbs / 0.800kg
Estimated Product Box Weight: 3.30lbs / 1.500kg

$227.27

Fiberglass Tank Cover
BPFX-7431A
This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover.

Note that BPFX-7431 cannot be used with the stock battery cover and must be used with BPFX-7431B.
Estimated Product Weight: 1.43lbs / 0.650kg
Estimated Product Box Weight: 2.20lbs / 1.000kg

$163.46

Fiberglass Battery Box Cover
BPFX-7431B
This component replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.77lbs / 0.350kg
$63.81

Fiberglass Upper Cowling - Race - Cup Style
BPFU-7131
This lightweight fiberglass upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. This part is primed but may require some light sanding and/or fill primer prior to painting. A must for anyone racing the RC390!

Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion.
Estimated Product Weight: 1.15lbs / 0.523kg
Estimated Product Box Weight: 2.70lbs / 1.227kg

$123.08

Fiberglass Side Cowling - A - Left
BPFX-7231L
Side Cowling A, Left, Race (GRP)
This lightweight fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7331L Performance Side Cowling B, Left, Race (GRP)
or
BPCX-7331L Performance Side Cowling B, Left, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$123.08

Fiberglass Side Cowling - A - Right
BPFX-7231R
Side Cowling A, Left, Race (GRP)
This lightweight fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7331R Performance Side Cowling B, Right, Race (GRP)
or
BPCX-7331R Performance Side Cowling B, Right, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$123.08

Fiberglass Side Cowling - B - Left
BPFX-7331L
Side Cowling B, Left, Race (GPR)
This lightweight Fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7231L Performance Side Cowling A, Left, Race (GRP)
or
BPCX-7231L Performance Side Cowling A, Left, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$123.08

Fiberglass Side Cowling - B - Right
BPFX-7331R
Side Cowling B, Right, Race (GPR)
This lightweight Fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7231R Performance Side Cowling A, Right, Race (GRP)
or
BPCX-7231R Performance Side Cowling A, Right, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg
$123.08

Mirror Blanking Plates, L&R, CNC Silver
TYLY-0185
Handy mirror blanking plates for your KTM RC125/200/250/390
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x 6x14 screws are supplied.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 0.22lbs / 0.100kg
$46.92

Mirror Blanking Plates, L&R, CNC Black
TYLY-1185
Handy mirror blanking plates for your KTM RC125/200/250/390
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x 6x14 screws are supplied.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 0.22lbs / 0.100kg
$46.92

Windshield - Race - Clear
SCRE-0163
For use with TYGA Style KTM RC race upper fairings BPFU-7131 and BPCU-7131

Screen fasteners are supplied with this product.

See also SCRE-0164 Screen Tint, TYGA Style KTM Fairing, Kit.
Estimated Product Weight: 1.10lbs / 0.500kg
Estimated Product Box Weight: 1.10lbs / 0.500kg

$38.16

Windshield - Race - Tint
SCRE-0164
For use with TYGA Style KTM RC race upper fairings BPFU-7131 and BPCU-7131.

Screen fasteners are supplied with this product.

See also SCRE-0163 Screen Clear, TYGA Style KTM Fairing, Kit.
Estimated Product Weight: 1.10lbs / 0.500kg
Estimated Product Box Weight: 1.10lbs / 0.500kg

$38.16

Seat Pad
BPSP-0007
EVA foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!

Underside of seat has 3M double sided tape for easy application.
Estimated Product Weight: 0.04lbs / 0.018kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

$23.00

Seat Bum Stop
BPSP-0003
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike.
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg
$9.95

Carbon Parking Brake
TYTO-0030
The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations:
-When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand
-Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle
-Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc.

Don't worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature.

It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you'll be surpised how handy it is!
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg

$33.95

Fender Eliminator - Standard
TYLY-0148
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.44lbs / 0.200kg
$46.59

Fender Eliminator - TYGA Undertail Exhaust
TYLY-0147
Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Estimated Product Weight: 0.51lbs / 0.232kg
Estimated Product Box Weight: 0.44lbs / 0.200kg
$58.10

Carbon License Plate Frame
BPCC-6002
This is a real carbon fiber motorcycle license plate frame made by TYGA Performance and is made to fit the standard size US motorcycle license plates. It's perfect for those motorcycle enthusiasts with carbon fiber parts on their beloved bikes or just simply wants to add a performance touch.

Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

Package will include 1 real carbon fiber motorcycle license plate frame that fits onto standard size US motorcycle license plates; screws are not included for the installation.
Estimated Product Weight: 0.55lbs / 0.250kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

$71.31

TYGA Radiator Overflow Bottle Kit
BPAC-1002
Comprising clear pp plastic bottle, overflow tube and cable ties, this useful lightweight product is ideal for race bikes and for specials and repalces the cumbersome and ugly stock item.
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg
$23.00

KTM Keyless Tank Cap
TYLY-0223
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes.

This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)

Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap. If your tank cap is centered it will not fit. If your tank cap is offset from center and moved up, then it should. Unfortunatly KTM isn't clear which model years have which caps.

Estimated Product Weight: 0.62lbs / 0.282kg
Estimated Product Box Weight: 0.35lbs / 0.159kg

$52.93

Steering Stopper
BPSY-0159
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from 'tank slappers'. Installs in minutes. No special tools or dismantling of the bike required.

Fitting Instructions:
1) Remove 2x M3 bolts and spring washers, and remove the top plate
2) Remove cover from 3M double sided tape
3) Lift the steering stopper into position to wrap around the standard
steering stopper on the frame. It should hold itself in place with the tape
4) Refit cover, M3 screws and washers and tighten the screws securely.
5) Go racing!!
Estimated Product Weight: 0.10lbs / 0.045kg
Estimated Product Box Weight: 0.04lbs / 0.018kg

$15.56

Orange Duck Tape
DUCK-TAPE-ORANGE
Orange Duck Tape - Perfect for covering ugly wheel weights obstructing the Orange color of your orange wheels!
1.88 inch wide x 15 yards

Estimated Product Weight: 0.35lbs / 0.159kg
Estimated Product Box Weight: 0.10lbs / 0.045kg
$8.99

Bike Cover - Two Tone Orange/Black
TMER-0049
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700.
Estimated Product Weight: 1.59lbs / 0.723kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

$50.60

Carbon Workshop Tray 300x200
TYTO-0004A
Using high end automotive and aerospace technology, this useful and beautiful tray will be the envy of all your friends and racing competitors and we promise that it will become an essential and indispensable part of your tool kit, as it has ours! The tray is both lightweight and extremely strong due to the method of construction and the materials used. Using a balance of craftsmanship and technology, each tray is individually laminated by skilled workers in a precision aluminium mold where it is subjected to high pressure to give unrivalled crisp and sharp finish which is both chemical and abrasion resistant.

We have been testing these trays for several months now and given them no mercy. We have put brake fluid, carburetor cleaner, engine oil, gasoline and other nasty fluids in them and they have retained both their strength and beautiful sheen. We have used them to hold various motorcycle parts and tools and apart from minor surface scratching which is to be expected, the hard epoxy finish has proven to be extremely tough and durable, but forgiving enough not to damage any delicate parts.

Of course, like all trays, these can be used around the home for drinks, fruit bowl and other decorations. If you have an application or require a similar product in large quantities, please contact us and we will be happy to discuss all details including design through to manufacturing and delivery.

These trays are easily stackable and weigh only 240 grams


Estimated Product Weight: 0.53lbs / 0.241kg
Estimated Product Box Weight: 1.20lbs / 0.545kg

$62.22

Rear Stand Bobbins - Black
TYLY-1209
This item is suitable for any motorcycle with M10 bolt holes for rear stand bobbins.
Estimated Product Weight: 0.18lbs / 0.082kg
Estimated Product Box Weight: 0.22lbs / 0.100kg
$18.58

Rear Stand Bobbins - Silver
TYLY-0209
This item is suitable for any motorcycle with M10 bolt holes for rear stand bobbins
Estimated Product Weight: 0.18lbs / 0.082kg
Estimated Product Box Weight: 0.22lbs / 0.100kg
$18.58


Product list or pricing last updated on: Tue Oct 12 12:42:14 2021 CST
To read all about our Packaging, Shipping, and returns policy click here