This TYGA designed upper fairing kit replaces the ugly stock set up with attractive sleek styling.

As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.

In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.

The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.

Estimated Product Weight: 6.93lbs / 3.150kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points and this part is finished in high gloss UV resistant clearcoat so no need to paint.

This product is supplied with all mounting hardware.

We aim to have this product in stock at all times for immediate shipping. Now waiting or worrying about if the parts will arrive in time for your next race.
Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but has been modified to take the stock KTM rear light cluster and registration/license plate holder. Being made from carbon it is lighter than stock and is supplied finished in high gloss UV resistant clearcoat so no need to paint.

This product is supplied with all mounting hardware and consists of the seperate components: Seat Pad, Seat Cowling Top, and the Seat Cowling Undertray, all which are also available seperately.

---

Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of carbon is much lighter. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.

This product is supplied with all mounting hardware.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 2.80lbs / 1.273kg

This lightweight carbon pillion seat cover replaces the stock foam passenger seat. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes. This product is supplied with all mounting hardware.

Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.88lbs / 0.400kg

This lightweight fiberglass pillion seat cover comes painted in black and replaces the stock foam passenger seat. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes. This product is supplied with all mounting hardware.

Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.88lbs / 0.400kg

This lightweight fiberglass pillion seat cover replaces the stock foam passenger seat. TEMPORARY PHOTO shows the painted version. This version is sprayed with primer, but not painted! As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes. This product is supplied with all mounting hardware.

Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.88lbs / 0.400kg

This set comprises the carbon products of the Fender, Rear Hugger, and the Chain Guard. Enjoy great savings on product prices and shipping when ordering the parts together in a set instead of separately.
Estimated Product Weight: 1.61lbs / 0.732kg
Estimated Product Box Weight: 2.50lbs / 1.136kg

This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clearcoat so no additional painting is necessary.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

This product can be fitted to a street bike as well as cup racing bikes.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from lightweight carbon and high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It is reinforced with carbon/Kevlar at the mounting points and is finished in a UV resistant clearcoat so no additional painting is necessary.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive.

This product can be fitted to a street bike as well as cup racing bikes.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.

All fitting hardware included.

See table below for compatibility between belly pans and exhaust systems:

Model Exhaust	BPFL-7231	BPCL-7231	BPFL-7331	BPCL-7331	BPCL-7431	BPFL-7431
OEM KTM 2014-16	yes	yes	yes	yes	no	no
OEM KTM 2017-2019+	yes	yes	yes	yes	no	no
EXPS-0061	yes	yes	yes	yes	yes	yes
EXPS-0062	yes	yes	yes	yes	yes	yes
EXPS-0062	yes	yes	yes	yes	yes	yes
EXPS-0091	yes	yes	yes	yes	yes	yes
EXPS-0092	yes	yes	yes	yes	yes	yes
EXPS-0111	no	no	no	no	yes	yes
EXPS-0112	no	no	no	no	yes	yes

Estimated Product Weight: 2.40lbs / 1.091kg
Estimated Product Box Weight: 7.71lbs / 3.505kg

This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
Estimated Product Weight: 0.62lbs / 0.282kg
Estimated Product Box Weight: 1.60lbs / 0.727kg

Item is for the RC390R but also fits all RC model years. This sleek hugger replaces the nasty plastic item, adds class to your ride and is an easy installation. Combine with the Carbon RC390R Chain Guard (BPCX-7131) for a super sleek and easy to access the rear shock or chain function and looks.
Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.66lbs / 0.300kg

Item is for the RC390R but also fits all RC model years. This sleek chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.35lbs / 0.159kg
Estimated Product Box Weight: 0.80lbs / 0.364kg

This rear hugger/chain guard assembly replaces the nasty plastic items, adds class to your ride and is an easy installation. Consists of the two products below.
Estimated Product Weight: 1.05lbs / 0.477kg
Estimated Product Box Weight: 2.50lbs / 1.136kg

This rear hugger replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.28lbs / 0.127kg
Estimated Product Box Weight: 0.55lbs / 0.250kg

This rear hugger/chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.

This product is also part of the sets BPCH-7131 and BPFS-1106
Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 2.50lbs / 1.136kg

This rear hugger/chain guard assembly also covers the swing arm to give it a smooth and race orientated appearance. Adds class to your ride and is an easy installation. Ideally, it can be installed with rear stand spools TYLY-1209 and TYLY-0209.

Estimated Product Weight: 2.20lbs / 1.000kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.

Please note, this product fits the 390 Duke and RC390.
Estimated Product Weight: 0.26lbs / 0.118kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

This component replaces the nasty plastic items, adds class to your ride and is an easy installation.

This product can also be ordered seperately as battery box cover BPCX-7431A and tank cover BPCX-7431B, however please note that BPCX-7431 cannot be used with the stock battery cover.
Estimated Product Weight: 2.29lbs / 1.041kg
Estimated Product Box Weight: 3.30lbs / 1.500kg

This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover.

Note that BPCX-7431 cannot be used with the stock battery cover and must be used with BPCX-7431B.
Estimated Product Weight: 1.96lbs / 0.891kg
Estimated Product Box Weight: 2.20lbs / 1.000kg

This component replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.77lbs / 0.350kg

Carbon Upper Cowling replaces the stock heavy and brittle stock unit with a carbon unit.
Estimated Product Weight: 1.15lbs / 0.523kg
Estimated Product Box Weight: 2.70lbs / 1.227kg

Side Cowling A, Left, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.

Must be used with:
BPFX-7331L TYGA Performance Side Cowling B, Left, Race (GRP)
or
BPCX-7331L TYGA Performance Side Cowling B, Left, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling A, Right, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.

Must be used with:
BPFX-7331R TYGA Performance Side Cowling B, Right, Race (GRP)
or
BPCX-7331R TYGA Performance Side Cowling B, Right, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling B, Left, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP)
or
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling B, Right, Race (Carbon)
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231R Performance Side Cowling A, Right, Race (GRP)
or
BPCX-7231R Performance Side Cowling A, Right, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

2014-2015 Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 0.60lbs / 0.273kg

2016-2019+ model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 0.60lbs / 0.273kg

2014-2015 Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.60lbs / 0.273kg

2016-2019+ Model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.60lbs / 0.273kg

2014-2019+ - Fits ALL model years - This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.

Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.60lbs / 0.273kg

Universal, Swing Arm, Carbon Shark Fin Guard This tough carbon shark fin is designed to fit on the bottom.

Estimated Product Weight: 0.19lbs / 0.086kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

This lightweight all aluminium upper cowling/meter stay replaces the heavy cast one supplied with the bike and weighs only a third of the original. It is designed to be strong but minimal and supports both the fairing and instrument securely while saving 1 kg/2.2 pounds in weight. In addition to the weight saving, it is very easy to install and in the event of an accident, easy to repair. It has rubber mountings to support the instrument cluster and can be installed in a matter of minutes. Please note this is for circuit use only and can be installed with either stock KTM bodywork or TYGA Performance race bodywork.
BEFORE @ 1.52kg: AFTER @ 0.52kg:

Stock headlights cannot be used with this race orientated product. RACE ONLY

Estimated Product Weight: 1.21lbs / 0.550kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

This TYGA designed upper fairing kit replaces the ugly stock set up with attractive sleek styling.

As well as a cosmetic enhancement, this kit incorporates modern LED headlights with two units on dip, two on full beam and two side lights to give excellent illumination at night and visibility of your bike to other road users during the day.

In addition, the design allows for wider spacing of the rear view mirrors for great safety and lighter weight for better performance.

The components are carefully designed to reduce weight with the subframe being made from lightweight tubular aluminium alloy and the main fairing made from either carbon fiber or glass reinforced plastic for strength and lightweight.

Estimated Product Weight: 7.15lbs / 3.250kg
Estimated Product Box Weight: 2.00lbs / 0.909kg

This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but being made from high quality glass mat and the best epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. We also modified the mounting points to make it easier to install. Mounting points are reinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware.

We aim to have this product in stock at all times for immediate shipping. Now waiting or worrying about if the parts will arrive in time for your next race.
Estimated Product Weight: 2.43lbs / 1.105kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight seat cowling is modelled on the KTM RC390 Cup shape, but has been modified to take the stock KTM rear light cluster and registration/license plate holder. This product is made using the best epoxy resins and high quality glass mat. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware and consists of the seperate components: Seat Pad, Seat Cowling Top, and the Seat Cowling Undertray, all which are also available seperately.

---

Estimated Product Weight: 2.91lbs / 1.323kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight seat cowling is the same shape as the stock foam passenger seat but being made of the best epoxy resin and high quality glass mat fiberglass is much lighter and can be painted to match your bike. This part is primed but may require some light sanding and/or fill primer prior to painting. This product is supplied with all mounting hardware. As well as the weight saving, it adds style and individualism to your ride and can be installed in minutes.

This product is supplied with all mounting hardware.
Estimated Product Weight: 1.32lbs / 0.600kg
Estimated Product Box Weight: 2.80lbs / 1.273kg

This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive so as to satisify most race organizations requirements for a fluid catchment.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This lightweight belly pan is modelled on the KTM RC390 Cup shape, but being made from high quality epoxy resin, it is stronger and more flexible so more likely to survive in the event of a crash. It isreinforced with carbon/Kevlar at the mounting points. This part is primed but may require some light sanding and/or fill primer prior to painting.

This product is supplied with all mounting hardware (including the left rear stay which is not supplied with the KTM product) so you can install this with stock footpegs or any other aftermarket make such as TYGA Performance. it is also supplied with a rubber bung to make the belly pan fluid retentive so as to satisify most race organizations requirements for a fluid catchment.
Estimated Product Weight: 1.48lbs / 0.673kg
Estimated Product Box Weight: 2.90lbs / 1.318kg

This belly pan follows the design of the KTM WSS300 but we have modified it so it can be used on the street too! This means that unlike the KTM design, you can install this belly pan with either the sidestand installed or not and use either a street or race gear shift. This belly pan is compatible with our WSS300 exhaust system EXPS-0111 and EXPS-0112.

All fitting hardware included.

See table below for compatibility between belly pans and exhaust systems:

Model Exhaust	BPFL-7231	BPFL-7231	BPFL-7331	BPFL-7331	BPFL-7431	BPFL-7431
OEM KTM 2014-16	yes	yes	yes	yes	no	no
OEM KTM 2017-2019+	yes	yes	yes	yes	no	no
EXPS-0061	yes	yes	yes	yes	yes	yes
EXPS-0062	yes	yes	yes	yes	yes	yes
EXPS-0062	yes	yes	yes	yes	yes	yes
EXPS-0091	yes	yes	yes	yes	yes	yes
EXPS-0092	yes	yes	yes	yes	yes	yes
EXPS-0111	no	no	no	no	yes	yes
EXPS-0112	no	no	no	no	yes	yes

Estimated Product Weight: 2.40lbs / 1.091kg
Estimated Product Box Weight: 7.71lbs / 3.505kg

This lightweight yet tough fiberglass front fender replaces the plastic item, and is ideal for racing whre crash resistance is important. This part is primed but may require some light sanding and/or fill primer prior to painting.
Estimated Product Weight: 0.84lbs / 0.382kg
Estimated Product Box Weight: 2.50lbs / 1.136kg

This component replaces the nasty plastic items, adds class to your ride and is an easy installation.

This product can also be ordered seperately as battery box cover BPFX-7431A and tank cover BPFX-7431B, however please note that BPFX-7431 cannot be used with the stock battery cover.
Estimated Product Weight: 1.76lbs / 0.800kg
Estimated Product Box Weight: 3.30lbs / 1.500kg

This component replaces the nasty plastic item, adds class to your ride and is an easy installation. Note this product consists of just the rear part of the tank cover.

Note that BPFX-7431 cannot be used with the stock battery cover and must be used with BPFX-7431B.
Estimated Product Weight: 1.43lbs / 0.650kg
Estimated Product Box Weight: 2.20lbs / 1.000kg

This component replaces the nasty plastic item, adds class to your ride and is an easy installation.
Estimated Product Weight: 0.33lbs / 0.150kg
Estimated Product Box Weight: 0.77lbs / 0.350kg

This lightweight fiberglass upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. This part is primed but may require some light sanding and/or fill primer prior to painting. A must for anyone racing the RC390!

Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion.
Estimated Product Weight: 1.15lbs / 0.523kg
Estimated Product Box Weight: 2.70lbs / 1.227kg

Side Cowling A, Left, Race (GRP)
This lightweight fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7331L Performance Side Cowling B, Left, Race (GRP)
or
BPCX-7331L Performance Side Cowling B, Left, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling A, Left, Race (GRP)
This lightweight fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7331R Performance Side Cowling B, Right, Race (GRP)
or
BPCX-7331R Performance Side Cowling B, Right, Race (Carbon)
Estimated Product Weight: 0.82lbs / 0.373kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling B, Left, Race (GPR)
This lightweight Fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7231L Performance Side Cowling A, Left, Race (GRP)
or
BPCX-7231L Performance Side Cowling A, Left, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Side Cowling B, Right, Race (GPR)
This lightweight Fiberglass side cowling replaces the heavier stock plastic item. This part is primed but may require some light sanding and/or fill primer prior to painting. Ideal for racing.
Must be used with:
BPFX-7231R Performance Side Cowling A, Right, Race (GRP)
or
BPCX-7231R Performance Side Cowling A, Right, Race (Carbon)
Estimated Product Weight: 0.99lbs / 0.450kg
Estimated Product Box Weight: 1.00lbs / 0.455kg

Handy mirror blanking plates for your KTM RC125/200/250/390
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x 6x14 screws are supplied.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

Handy mirror blanking plates for your KTM RC125/200/250/390
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
2x Mirror Blanking plates and 4x 6x14 screws are supplied.
Estimated Product Weight: 0.13lbs / 0.059kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

For use with TYGA Style KTM RC race upper fairings BPFU-7131 and BPCU-7131

Screen fasteners are supplied with this product.

See also SCRE-0164 Screen Tint, TYGA Style KTM Fairing, Kit.
Estimated Product Weight: 1.10lbs / 0.500kg
Estimated Product Box Weight: 1.10lbs / 0.500kg

For use with TYGA Style KTM RC race upper fairings BPFU-7131 and BPCU-7131

Review by racer: At 182cm this gave me a perfect bubble of still air and I suffered so much less fatigue fighting the wind blast. I even picked up some top speed along the main straight at our local track!

See photo for details on the difference in size

Screen fasteners are supplied with this product.

Estimated Product Weight: 0.77lbs / 0.350kg
Estimated Product Box Weight: 1.10lbs / 0.500kg

For use with TYGA Style KTM RC race upper fairings BPFU-7131 and BPCU-7131

Screen fasteners are supplied with this product.

See also SCRE-0163 Screen Clear, TYGA Style KTM Fairing, Kit.
Estimated Product Weight: 1.10lbs / 0.500kg
Estimated Product Box Weight: 1.10lbs / 0.500kg

EVA foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!

Underside of seat has 3M double sided tape for easy application.
Estimated Product Weight: 0.04lbs / 0.018kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike.
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg

The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle with a hydraulic front brake system, both on and off road. Made from stylish and strong carbon fiber it locks the bike and prevents the bike rolling forward or back while in a parked position. Slip the TYGA Parking Brake into position over the throttle and front brake lever and it will lock the front wheel solid. Useful for a variety of situations:
-When parking on uneven ground, gives peace of mind that the bike will not roll off sidestand
-Useful for locking the motorcycle front wheel during transportation of the motorcycle in or on another vehicle
-Handy for bleeding air out of the front brake system of the bike. Applied over night it will help to squeeze the air to the bleed nipples and reservoir etc.

Don't worry, it is impossible to forget to remove before riding because it covers the throttle so it has this inherent built in safety feature.

It is one of those things that you probably thought you never needed but once you have this TYGA Parking Brake, you'll be surpised how handy it is!
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg

Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Estimated Product Weight: 0.44lbs / 0.200kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

Precision cut from laser cut aluminium, and then powdercoated to give a tough finish, this product saves weight and looks much neater than the heavy steel and plastic item it replaces. It is designed to take stock KTM turn signals and registration light and is an easy installation.
Estimated Product Weight: 0.51lbs / 0.232kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

This is a real carbon fiber motorcycle license plate frame made by TYGA Performance and is made to fit the standard size US motorcycle license plates. It's perfect for those motorcycle enthusiasts with carbon fiber parts on their beloved bikes or just simply wants to add a performance touch.

Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

Package will include 1 real carbon fiber motorcycle license plate frame that fits onto standard size US motorcycle license plates; screws are not included for the installation.
Estimated Product Weight: 0.55lbs / 0.250kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

Comprising clear pp plastic bottle, overflow tube and cable ties, this useful lightweight product is ideal for race bikes and for specials and repalces the cumbersome and ugly stock item.
Estimated Product Weight: 0.11lbs / 0.050kg
Estimated Product Box Weight: 0.11lbs / 0.050kg

This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes.

This product is suitable for KTM RC series sports bike models (RC125/200/250 and 390)

Fits all KTM RC models which are using the OEM filler cap with code: 90507008000 (2014-2016) but also may fit on later models using a 7 hole filler cap. If your tank cap is centered it will not fit. If your tank cap is offset from center and moved up, then it should. Unfortunatly KTM isn't clear which model years have which caps.

Estimated Product Weight: 0.62lbs / 0.282kg
Estimated Product Box Weight: 0.35lbs / 0.159kg

This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves. Supplied complete with seals, it can be installed in minutes and you can re-use the original screws.

Fits all KTM RC models which are using the OEM filler cap with the hole offset towards the back (towards the rider) of the tank hole. If your tank cap is centered it will not fit. If your tank cap is offset from center and moved down, then it should fit. To our knowlege, this change was only made to the 2022 RC390 and up.
For North America versions of the KTM RC series model years 2014 to 2021 you will use the TYLY-0223. This is ONLY for 2022 model years and up where KTM flipped the offset of the hole from the forward position to the bottom position... because... KTM.

Estimated Product Weight: 0.62lbs / 0.282kg
Estimated Product Box Weight: 0.35lbs / 0.159kg

Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from 'tank slappers'. Installs in minutes. No special tools or dismantling of the bike required.

Fitting Instructions:
1) Remove 2x M3 bolts and spring washers, and remove the top plate
2) Remove cover from 3M double sided tape
3) Lift the steering stopper into position to wrap around the standard
steering stopper on the frame. It should hold itself in place with the tape
4) Refit cover, M3 screws and washers and tighten the screws securely.
5) Go racing!!
Estimated Product Weight: 0.10lbs / 0.045kg
Estimated Product Box Weight: 0.04lbs / 0.018kg

Orange Duck Tape - Perfect for covering ugly wheel weights obstructing the Orange color of your orange wheels!
1.88 inch wide x 15 yards

Estimated Product Weight: 0.35lbs / 0.159kg
Estimated Product Box Weight: 0.10lbs / 0.045kg

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see part 08P34-KPP-700.
Estimated Product Weight: 1.59lbs / 0.723kg
Estimated Product Box Weight: 0.44lbs / 0.200kg

Using high end automotive and aerospace technology, this useful and beautiful tray will be the envy of all your friends and racing competitors and we promise that it will become an essential and indispensable part of your tool kit, as it has ours! The tray is both lightweight and extremely strong due to the method of construction and the materials used. Using a balance of craftsmanship and technology, each tray is individually laminated by skilled workers in a precision aluminium mold where it is subjected to high pressure to give unrivalled crisp and sharp finish which is both chemical and abrasion resistant.

We have been testing these trays for several months now and given them no mercy. We have put brake fluid, carburetor cleaner, engine oil, gasoline and other nasty fluids in them and they have retained both their strength and beautiful sheen. We have used them to hold various motorcycle parts and tools and apart from minor surface scratching which is to be expected, the hard epoxy finish has proven to be extremely tough and durable, but forgiving enough not to damage any delicate parts.

Of course, like all trays, these can be used around the home for drinks, fruit bowl and other decorations. If you have an application or require a similar product in large quantities, please contact us and we will be happy to discuss all details including design through to manufacturing and delivery.

These trays are easily stackable and weigh only 240 grams

Estimated Product Weight: 0.53lbs / 0.241kg
Estimated Product Box Weight: 1.20lbs / 0.545kg

This item is suitable for any motorcycle with M10 bolt holes for rear stand spools.

NOTE: The Bajaj factory that produces the KTM RC390 and Duke 390 does not have the best QC standards where it comes to the thread pitch for the rear spools mount location locations on the swingarm. I have found that MOST are threaded and tapped correctly with Fine M10x1.25 pitch threads, but occasionally some swingarms have been tapped with Course M10x1.5 pitch threads. I have also found instances where the holes are not threaded at all, and even on one occasion where a broken tap was discovered stuck in a brand new bike and it came that way from the factory! Officially, the threads are supposed to be M10x1.25 pitch. Most likely, your swingarm will be threaded as such, but if the threads do NOT fit, then you (unfortunately) have one of the swingarms where the factory worker grabbed the wrong thread pitch tap when they hand tapped your swingarm. This is covered extensively in the online forums, so just be aware that the bolts may not fit. It's unlikely, but it is possible. If you start to thread in your spools, and the bolt doesn't thread in easily, STOP!!! Don't force it. Check your threads in the swingarm against the threads on the bolt, and ensure that they are the same. Sometimes, the threads just need to be cleaned. Sometimes, the swingarm has the correct size but wrong thread pitch.
Estimated Product Weight: 0.18lbs / 0.082kg
Estimated Product Box Weight: 0.22lbs / 0.100kg

This item is suitable for any motorcycle with M10 bolt holes for rear stand spools
Estimated Product Weight: 0.18lbs / 0.082kg
Estimated Product Box Weight: 0.22lbs / 0.100kg